Εφαρμογές

TECAST (PA6 G)
Cast Nylon

TECAFORM AH black (POM-C)
Machining Bearing block for metal shafts

Very good sliding properties
High stiffness
Easily machinable
Long life time

TECAMID 66 MH (PA 66)
Machining Bushing for the connection of tubes with different diameters

Good wear resistance
Good UV-resistance
Increased surface hardness

TECARIM (PA6 G)
Cast Nylon Guidance of the wires and the chairs at the cable car constructions over the pylon

Very good wear resistance
Good cold impact resistance
Good dimension stability

TECAST mod. (PA6 G)
Cast Nylon Increasing of the lifting capacity at simultaneous reducing of the wear and weight [more...]

High surface pressure
Good toughness
Easy to maintain
Usable at typical temperatures
Very good corrosion resistance

TECAPET TF (PET, solid lubricant)
Machining Cam disc for the guidance of bottles in the beverage industry

FDA conform
Good sliding properties
Good dimension stability

TECAFORM AD (POM-H)
Machining

High dimensional stability
Good sliding properties
Easily machinable

TECAFORM AH (POM-C)
Machining Case for the protection of a camera

Good slide-wear performance
Good dimensional stability
Good weather resistance
Good thoughness and stiffness

TECAPEEK MT schwarz (PEEK)
Injection Moulding/Machining Precise adaption of the meassurement capillaries for optoelectrical analysis (lowest systematic meassurement error)

Low thermal expansion at fast temperature changes
Good chemical resistance to desinfectants and detergents
High precision at the machining
Intensive pigmentation (deep black) allows very accurate messurement results

TECATRON GF40 (PPS GF40)
Machining Cavity for electronical parts

Very high stiffness and strength
Very good chemical resistance
Good electronical and thermal insulation

TECANAT (PC)
Machining Case for visual control of drugs

FDA compliant
Good dimensional stability
Low water absorption
Good transparency

TECADUR PBT GF 30 (PBT GF)
Machining Insulating part for the carrying of electronical contacts

Very good electrical insulation
Low water absorption
Excellent dimensional stability

TECASON E (PES)
Machining Dialysis block for the distribution and control of the media flow

Good sterilisation resistance
Burr free surface
FDA compliant grades available
Transluzent

TECAGLIDE (PA 6 G, solid lubricant)
Machining Conveyor screw for the shock free and silent conveying of the bottles to the cleaning and filling station

Low slide-friction coefficient
Good wear resistance
Easily machinable

TECARIM (PA6 G)
Cast Nylon Forming substructure of special ergonomic formed couches for the dental sector

Low warpage
Good chemical resistance to detergents and desinfectants
High production precision
Integration of hollow areas through a core technology

TECAFLON PVDF (PVDF)
Injection Moulding Plunger for the volumetric dosing of fluid chemicals

Low symptoms of fatigue
Good electrical properties
Excellent chemical resistance

TECAST T (PA6 G)
Cast Nylon Buffer for pile drivers to reduce fibrations, noise and wear

Low symptoms of fatigue
Excellent impact resistance

TECATRON GF40 (PPS GF40)
Machining Pressed - high-strength end plate as closure- and end part of a fuel cell.

Excellent strength and stiffness
Good temperature resistance
Good dimensional stability
Very high strength also at higher temperatures

TECAMID 6 GF 20 VF (PA 6 GF)
Vaccuumforming Deep-drawable, reinforced Polyamide sheet for the manufacturing of large scaled parts (for example engine block cover)

High melt stability
High stiffness
Good resistance to oils and greases
Long term service temperature of up to 140 °C
Fibration strength

TECAFLON PVDF (PVDF)
Machining Fixing flange for the electrical and thermal insulation of plant components

Very good chemical resistance
Very good UV-resistance
Good compression strength

TECATRON GF40 (PPS GF40)
Machining Fluid tap for the flow regulation of chemical media

Very high stiffness and strength
Very good chemical resistance

TECAFLON PVDF (PVDF)
Machining Funnel for filling of fluid chemicals

Very good chemical resistance
Good toughness

TECAPEEK (PEEK)
Machining Torque transfer, also at extrem conditions

Good temperature resistance
High surface pressure

TECAPEEK MT (PEEK)
Injection Moulding Ergonomical formed handles for medical instruments for a better handling and avoidance of symptoms of fatique

Good sterilizability
Very good chemical resistance to desinfectants and detergents
High precision at the machining
High mechanical strength
Low weight

TECAPET (PET)
Machining For electrical insulation

Very good electrical insulation
Good dimensional stability
Very low water absorption

TECATOR 5013 (PAI)
Machining Insulating part for connectors for applications with extreme thermal and mechanical loadings in electronic high performance units

Good temperature resistance
Very good electronical insulation
Very low heat ageing
Excellent mechanical properties at temperatures > 200 °C

TECASON P MT coloured (PSU)
Machining For the determination of the size of the real knee cap implantation

Good dimension stability
Good rigidity
Good resistance to sterilisation/autoclaving
FDA compliant
Easily machinable
High production precision

TECAMID 66 CF 20/TECAMID 66 GF 30 (PA 66 CF/PA 66 GF)
Injection Moulding High load, resistable and cost optimised

Good sliding properties of the screw thread
High mechanical load
Good resistance to oils and greases
Good dimensional stability
Low wear
Good dry running properties

TECANAT (PC)
Industrial profiles Aeroplane-lighting cover for the passenger interior

Good weldable
Good transparency
Self-extinguishing
Approval for air and space industry

TECANAT (PC)
Machining Multiplier for the distribution of media and control of media flow

High purity
Excellent toughness
Dimensionally precise

TECAPEEK (PEEK)
Machining Orthosis for the support of the leg muscles. Lower weight and "armer" than metal

High flexability
Good stiffness and strength
Easily formable
Low weight
"Warm"

TECAPEEK MT blau (PEEK)
Injection Moulding/Machining Medical device for an easier breathing with a tracheotomy

Physiologicaly harmless in direct contact with the human organism
Good chemical resistance to desinfectants
Good electrical insulation
Good sterilisation resistance to all established processes
High precision for sharp-edged and absolute Burr-free screw thread

TECAPET (PET)
Machining Rollers for transport containers

Good stability
High creeping resistance
Good mechanical properties

TECARIM (PA6 G)
Cast Nylon

TECAMID 66 GF 25 TF 10 (PA 66 GF TF)
Injection Moulding The selection bar transfers the forces of the switching to the gear bar

High stiffness
Low friction coefficient
Low wear
Weight saving
High lifetime
Good corrosion resistance

TECAST (PA6 G)
Cast Nylon

TECAFLON PTFE (PTFE)
Machining Stamp for the dosing of viscous aggresive chemical media

Excellent chemical resistance
Low friction coefficient
No stick-slip-effect
FDA compliant

TECAST (PA6 G)
Cast Nylon

TECAFORM AH MT (POM-C)
Machining Test implants for the examination of sizes of hip joints

FDA compliant, bio compatible
Easily machinable
High production precision
Sterilizable
Good chemical resistance

TECARIM (PA6 G)
Cast Nylon

TECATOR 5013 (PAI)
Machining The transmission arm is suitable for the loading cycles at higher temperatures over the lifetime without a loss of mechanical properties and symptoms of fatigue

High temperature resistance
Good wear resistance
Very good creep resistance
High long time stability

TECAPEEK MT (PEEK)
Machining Long lifetime and very low reduction of mechanical properties over several hundrets sterilization cycles

Sterilizable, autoclavable
Good toughness
Good stiffness
Good wear resistance
Good dimensional stability
FDA conform, biocompatible

TECAPEI GF 30 (PEI GF30)
Injection Moulding Pulley for the transfer of high transmission forces

Can be used under the influence of energetic radiation
Good resistance to enegetic radiations
Approval for aerospace application
Good dimensional stability

TECAMID 6 (PA 6)
Machining Valve flange for electrical insulating fastenings

Low thermal expansion
Good chemical resistance
Very good impact resistance
Good electronical properties

TECASON E (PES)
Machining Valve spool for dosing fluid components in the food converting, with the simultanious possibility of the sisual contro of the media flow

High transparency
Good dimensional stability
FDA compliant
Good resistance to desinfectants and detergents

TECANAT (PC)
Machining "Inspection glass" for the control of fluid levels

High transparency
Low water absorption

TECAPEEK CF 31 (PEEK CF)
Injection Moulding Case for a safe transportation of wafers in the manufacturing process

Good chemical resistance
Defined electrical conductivity
Good thermal-mechanical resistance
Low ionic contamination

TECAPEEK CMF (PEEK)
Machining Testing device adapter for electronical parts in an automated testing device

Very low water absorption
Excellent heat distortion temperature
Easily machinable, low burr formation
Very good stiffness and strength
Good abrasion resistance
Good electrical insulation